XTENDEX
®
HDMI Over Gigabit IP Extender
Extend an HDMI display up to 333 feet away from the source over a
1000Base-T gigabit network.
Transmits an HDMI signal over one CATx cable.
Local and remote units can be connected together for a Point-to-Point
connection via CATx or a Point-to-Many connection via a network switch.
• Local and remote units must be in the same LAN. The units do not support
WAN connections.
• Support for multiple transmitters requires a managed network switch with
VLAN/IGMP support.
• One transmitter can connect up to 200 receivers using cascaded managed
network switches.
• Cascade managed switches up to 3 levels, allowing the farthest display to
be located up to 1,000 feet away from the source device. Each receiver can
be located up to 333 feet from the managed switch.
Supports HDTV resolutions to 1080p and computer resolutions to
1920x1200.
HDCP compliant.
Customizable EDID table on local unit.
Supports video wall installations from 1x2 to 8x8 screens.
Supports 2-way RS232 commands.
ST-IPHDMI-R-2G
XTENDEX
®
ST-C6DVIA-IR-300
DVI Extender with IR and Optional Stereo Audio via One CATx
Extend a single link digital DVI display and IR signal up to 300 feet.
Transmits DVI and IR signals over one CATx cable.
Supports HDTV resolutions to 1080p and computer resolutions to
1920x1200.
• Resolution varies depending on distance and type of CATx cable used.
Available with optional stereo audio.
Full IR control of DVI source from remote HDTV using existing source
remote control.
Available with optional stereo audio.
HDCP compliant.
Supports the DDC2B protocol.
Only one power supply is necessary to power both the local and remote
units.
XTENDEX
®
DVI Extender via Two Singlemode or Multimode Fiber Optic
Cables
Extend a single link digital DVI display up to 4,920 feet
(1,500 meters).
Signal transmission via two-strand singlemode or multimode LC fiber optic
cable – no RF interference.
• Using singlemode cable, extend to 4,920 feet (1,500 meters).
• Using multimode cable, extend to 1,640 feet (500 meters).
Supports computer resolutions to 1920x1200.
EDID learning for the support of any DVI display device.
Supports the DDC2B protocol.
Small form factor – allowing for easy connection and placement.
• Cables can be installed in conduit prior to extender installation.
Low RFI/EMI for sensitive applications.
ST-2FODVI-LC
XTENDEX
®
ST-FODVI-LC
DVI Extender via Four Multimode Fiber Optic Cables
Extend a single link digital DVI display up to 3,280 feet (1,000
meters).
Signal transmission via four-strand multimode LC fiber optic cable – no RF
interference.
Supports computer resolutions to 1920x1200.
EDID learning for the support of any DVI display device.
Supports the DDC2B protocol.
Small form factor – allowing for easy connection and placement.
• Cables can be installed in conduit prior to extender installation.
RGB and Clock signals are transmitted separately by multimode optical
fiber.
6
www.networktechinc.com/extenders-video.html | Extenders
(28 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce