Crystal Image Technologies KVM-IP8 Uživatelský manuál stáhnout pdf (Strana 13)

networktechinc.com

800.742.8324 | 330.562.7070

[email protected]

VEEMUX

DVI Video Matrix Switch

Switch single link digital DVI video from many video sources among

multiple displays.

 Route video from up to 32 single link digital DVI video sources to up to 32

displays and stereo audio speakers (with audio option).

 Configure and control the switch through Ethernet, serial port, front panel

buttons, or IR remote.

 Supports HDTV resolutions up to 1080p and computer resolutions up to

1920x1200.

 Signal type: single link digital DVI.

 Each output provides one video signal and one stereo audio signal (with

audio option).

 Each input can be independently connected to any or all outputs.

• HDCP is supported when connecting any one input to any one output (4x4

and 8x8 models only).

• HDCP is not supported when connecting one input to multiple outputs.

 EDID learning for the support of any DVI display device.

 Built-in default EDID configuration tables for both PC and MAC.

• Dual default EDID configuration tables: high resolution without audio and

TV resolution with audio.

 Available sizes: 4x4, 8x8, 16x16 and 32x32.

SM-8X8-DVI-LCD

VEEMUX

SM-8X8-C6HDR-POE-HDBT

HDMI Matrix Switch Over HDBase-T with Power Over Ethernet

(PoE)

Route and distribute HD 1080p, multi-channel audio, Ethernet, IR,

and power up to 328 feet using CATx cable.

 Route uncompressed digital HDMI signal and IR from eight HDMI video

sources to eight displays and speakers via CATx cable using HDBase-T

technology.

 Configure and control the switch through Ethernet, serial port, front panel

buttons, or IR remote control.

 Supports HDTV resolutions up to 1080p and computer resolutions up to

1920x1200.

• With CAT5e (24 AWG), up to 250 feet.

• With CAT6 (23 AWG), up to 300 feet.

• With CAT6a/7 (23 AWG), up to 328 feet.

 HDMI features supported: 24/36-bit Deep Color; x.v.Color; Dolby TrueHD,

DTS-HD Master Audio, Dolby Digital, DTS 7.1 and LPCM; 3D; Bandwidth

up to 225 MHz (6.75 Gbps); Support for CEC compatible devices; Lip Sync.

 HDCP compliant.

 Supports Power over Ethernet (PoE) – power supply not required at the

remote unit.

 Bi-directional IR from input and output locations.

 Features an Ethernet port on the switch and receivers for connecting network

devices such as 100Base-T routers, hubs, smart TVs, or smart Blu-Ray

players.

 Each input can be independently connected to any or all outputs.

 Supports external and internal EDID settings.

VEEMUX

A/V Matrix Switch via CATx to 600 Feet: VGA, S-Video,

Component Video

Route and distribute audio/video up to 600 feet using CATx cable

instead of bulky coax cables.

 Connect up to 32 video sources via transmitters and 16 video displays via

receivers with a maximum extension of 600 feet between the local and

remote units.

 Configure and control the switch through Ethernet, serial port or front panel

buttons.

 Video quality adjustment is done automatically at every connection change,

or can be forced via the front panel or web interface.

 Each output provides one video signal and one stereo audio signal.

 Each input can be independently connected to any or all outputs.

 VGA, S-Video and HDTV transmitters and receivers can be supported on the

same VEEMUX switch.

• VGA inputs only work with VGA outputs, S-Video inputs only work with

S-Video outputs, and HDTV component video inputs only work with

HDTV component video outputs.

 Video Resolutions:

• For VGA Receiver: up to 1920x1440.

• For S-Video Receiver: up to 800x600.

• For Component Video Receiver: up to 1080p.

 Available sizes: 8x8, 8x16, 16x8, 16x16, 32x8 and 32x16.

SM-16X16-C5AV-LCD (Front & Back) with a

ST-C5VA-L-600 Transmitter & ST-C5VA-R-600 Receiver

VEEMUX

SM-16X64-C5AV-1000

A/V Matrix Switch via CATx to 1,000 Feet: VGA, S-Video,

Component Video

Route and distribute audio/video up to 1,000 feet using CATx cable

instead of bulky coax cables.

 Connect up to 64 video sources via transmitters and 64 video displays via

receivers with a maximum extension of 1,000 feet between the local and

remote units.

 In addition to the remote inputs/outputs, the switch features one direct-

connect VGA and stereo audio input/output for every 16 remote RJ45

connectors.

 Configure and control the switch through Ethernet, serial port, front panel

buttons, or Infrared remote control.

 Supports resolutions up to 2048x1536 using NTI's 1,000' extenders and

1920x1440 using NTI's 600' extenders.

 Video quality adjustment is done automatically at every connection change,

or can be forced via the front panel or web interface.

 Each output provides one video signal and one stereo audio signal.

 Each input can be independently connected to any or all outputs.

 VGA, S-Video and HDTV transmitters and receivers can be supported on the

same VEEMUX switch.

• VGA inputs only work with VGA outputs, S-Video inputs only work with

S-Video outputs, and HDTV component video inputs only work with

HDTV component video outputs.

• The 1,000' transmitters will work with 600' receivers, and vice versa.

 Available sizes: 16x16, 16x32, 16x48, 16x64, 32x64, 64x16, 64x32 and

64x64.

Video Matrix Switches | www.networktechinc.com/video-matrix.html

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 22 23

Komentáře k této Příručce

Žádné komentáře

Crystal Image Technologies KVM-IP8 Uživatelský manuál Strana 13

Komentáře k této Příručce

Související produkty a manuály pro Síťové přepínače Crystal Image Technologies KVM-IP8